Search results

This study aims to minimize the pressure drop across wavy microchannels using secondary branches without compromising its capacity to transfer the heat. The impact of secondary flows on the pressure drop and heat transfer capabilities at different Reynolds numbers are investigated numerically for different wavy microchannels. Finally, different channels are evaluated using performance evaluation criteria to determine their effectiveness.

To investigate the flow and heat transfer capabilities in wavy microchannels having secondary branches, a 3D conjugate heat transfer model based on finite volume method is used. In conventional wavy microchannel, secondary branches are introduced at crest and trough locations. For the numerical simulation, a single symmetrical channel is used to minimize computational time and resources and the flow within the channels remains single-phase and laminar.

The findings indicate that the suggested secondary channels notably improve heat transfer and decrease pressure drop within the channels. At lower flow rates, the secondary channels demonstrate superior performance in terms of heat transfer. However, the performance declines as the flow rate increased. With the same amplitude and wavelength, the introduction of secondary channels reduces the pressure drop compared with conventional wavy channels. Due to the presence of secondary channels, the flow splits from the main channel, and part of the core flow gets diverted into the secondary channel as the flow takes the path of minimum resistance. Due to this flow split, the core velocity is reduced. An increase in flow area helps in reducing pressure drop.

Many complex and intricate microchannels are proposed by the researchers to augment heat dissipation. There are challenges in the fabrication of microchannels, such as surface finish and achieving the required dimensions. However, due to the recent developments in metal additive manufacturing and microfabrication techniques, the complex shapes proposed in this paper are feasible to fabricate.

Wavy channels are widely used in heat transfer and micro-fluidics applications. The proposed wavy microchannels with secondary channels are different when compared to conventional wavy channels and can be used practically to solve thermal challenges. They help achieve a lower pressure drop in wavy microchannels without compromising heat transfer performance.

The purpose of this paper is to study the flow and heat transfer characteristics of microchannel heatsinks with ribs, cavities and secondary channels. The influence of length and width of the ribs on heat transfer enhancement, secondary flows, flow distribution and temperature distribution are examined at different Reynolds numbers. The effectiveness of each heatsink is evaluated using the performance factor.

A three-dimensional solid-fluid conjugate heat transfer numerical model is used to study the flow and heat transfer characteristics in microchannels. One symmetrical channel is adopted for the simulation to reduce the computational cost and time. Flow inside the channels is assumed to be single-phase and laminar. The governing equations are solved using finite volume method.

The numerical results are analyzed in terms of average Nusselt number ratio, average base temperature, friction factor ratio, pressure variation inside the channel, temperature distribution, velocity distribution inside the channel, mass flow rate distribution inside the secondary channels and performance factor of each microchannels. Results indicate that impact of rib width is higher in enhancing the heat transfer when compared with its length but with a penalty on the pressure drop. The combined effects of secondary channels, ribs and cavities helps to lower the temperature of the microchannel heat sink and enhances the heat transfer rate.

The fabrication of microchannels are complex, but recent advancements in the additive manufacturing techniques makes the fabrication of the design considered in this numerical study feasible.

The proposed microchannel heatsink can be used in practical applications to reduce the thermal resistance, and it augments the heat transfer rate when compared with the baseline design.

The purpose of this paper is to review the key literature pertaining to consumption during the colonial period in India, broadly covering the time period from the early nineteenth century to the middle of the twentieth century. The review shows the prominent themes and patterns that help us understand colonial Indian consumers’ encounter with Western products and institutions.

The paper is a review of historical research papers and papers pertaining to the colonial period in India.

British colonialism introduced new products, institutions and ways of living into India, which were negotiated with and contested by Indian consumers and intellectuals. These new products and practices were not seamlessly adopted into the Indian context. Rather, they were appropriated into existing social structures determined by caste, gender and religion. The tensions produced by such negotiations and contestations fed Indian resistance to colonialism, culminating in British withdrawal from India.

Historical research pertaining to marketing in the Indian context is scarce. Moreover, there are few reviews which outline the important consumption practices and changes pertaining to the colonial period. The findings of this review will be of use to researchers and students of history, marketing and cultural studies.

The purpose of this paper is to address various works on mixed convection and proposes 10 unified models (Models 1–10) based on various thermal and kinematic conditions of the boundary walls, thermal conditions and/ or kinematics of objects embedded in the cavities and kinematics of external flow field through the ventilation ports. Experimental works on mixed convection have also been addressed.

This review is based on 10 unified models on mixed convection within cavities. Models 1–5 involve mixed convection based on the movement of single or double walls subjected to various temperature boundary conditions. Model 6 elucidates mixed convection due to the movement of single or double walls of cavities containing discrete heaters at the stationary wall(s). Model 7A focuses mixed convection based on the movement of wall(s) for cavities containing stationary solid obstacles (hot or cold or adiabatic) whereas Model 7B elucidates mixed convection based on the rotation of solid cylinders (hot or conductive or adiabatic) within the cavities enclosed by stationary or moving wall(s). Model 8 is based on mixed convection due to the flow of air through ventilation ports of cavities (with or without adiabatic baffles) subjected to hot and adiabatic walls. Models 9 and 10 elucidate mixed convection due to flow of air through ventilation ports of cavities involving discrete heaters and/or solid obstacles (conductive or hot) at various locations within cavities.

Mixed convection plays an important role for various processes based on convection pattern and heat transfer rate. An important dimensionless number, Richardson number (Ri) identifies various convection regimes (forced, mixed and natural convection). Generalized models also depict the role of “aiding” and “opposing” flow and combination of both on mixed convection processes. Aiding flow (interaction of buoyancy and inertial forces in the same direction) may result in the augmentation of the heat transfer rate whereas opposing flow (interaction of buoyancy and inertial forces in the opposite directions) may result in decrease of the heat transfer rate. Works involving fluid media, porous media and nanofluids (with magnetohydrodynamics) have been highlighted. Various numerical and experimental works on mixed convection have been elucidated. Flow and thermal maps associated with the heat transfer rate for a few representative cases of unified models [Models 1–10] have been elucidated involving specific dimensionless numbers.

This review paper will provide guidelines for optimal design/operation involving mixed convection processing applications.

This paper aims to investigate Jordan’s framework specifics of the anti-money laundering (AML) policy and factors related to the Central Bank instructions on money laundering.

A questionnaire has been distributed to a random data sample of 100 branch bank managers and supervisors who have a sufficient experience in this issue, and a t-test statistical technique has been used.

The results revealed that commercial banks of Jordan are committed to the instruction of the central bank, and they are highly qualified in all investigated measures.

This study supports the Central Bank of Jordan’s efforts in combating money laundering, which encourage all commercial banks of one country to follow the same adopted regulations to identify and report transactions of suspicious behaviour: investigate capability of the tellers and customer account representatives to report such activities, use AML software, filter customer’s data classify available information according to levels of suspicion or based on the uncertain customers without being subject to the institutional secrecy jurisdiction and to work under cooperative management.

It has been recommended to utilize more advanced technology, intensify training and ensure for more knowing clients’ knowledge. The importance of this paper is to insure the following: first, the banking system is obliged to recognize and report suspicious money laundering transactions, regarding up to date the FATFA equivalence status of other countries; second, increase the awareness and ensure the central bank efforts’ success; third, assure the adequacy of different issues such as the internal control system tools; devices or tools availability; and sufficient employees’ qualifications in facing launderers attempts; fourth, to be sure that suspected transactions are checked against any commercial bank records; finally, to be sure that commercial banks are giving enough considerations to all the AML proactive actions such as the regulations of checking while opening an account, accepting money on deposit, giving loans, issuing a debit card, traveller’s check and collecting enough information about new clients.

A parabolic trough solar collector is an advanced concentrated solar power technology that significantly captures radiant energy. Solar power will help different sectors reach their energy needs in areas where traditional fuels are in use. This study aims to examine the sensitivity analysis for optimizing the heat transfer and entropy generation in the Jeffrey magnetohydrodynamic hybrid nanofluid flow under the influence of motile gyrotactic microorganisms with solar radiation in the parabolic trough solar collectors. The influences of viscous dissipation and Ohmic heating are also considered in this investigation.

Governing partial differential equations are derived via boundary layer assumptions and nondimensionalized with the help of suitable similarity transformations. The resulting higher-order coupled ordinary differential equations are numerically investigated using the Runga-Kutta fourth-order numerical approach with the shooting technique in the computational MATLAB tool.

The numerical outcomes of influential parameters are presented graphically for velocity, temperature, entropy generation, Bejan number, drag coefficient and Nusselt number. It is observed that escalating the values of melting heat parameter and the Prandl number enhances the Nusselt number, while reverse effect is observed with an enhancement in the magnetic field parameter and bioconvection Lewis number. Increasing the magnetic field and bioconvection diffusion parameter improves the entropy and Bejan number.

Nanotechnology has captured the interest of researchers due to its engrossing performance and wide range of applications in heat transfer and solar energy storage. There are numerous advantages of hybrid nanofluids over traditional heat transfer fluids. In addition, the upswing suspension of the motile gyrotactic microorganisms improves the hybrid nanofluid stability, enhancing the performance of the solar collector. The use of solar energy reduces the industry’s dependency on fossil fuels.

The purpose of this study is to conduct research on a new kind of division microchannel heat sink (D-MCHS), which can distribute cooling water along the channel-length direction. First, the pressure drops in the D-MCHS with different division region numbers were compared. Then, the cooling performance of the D-MCHS with different division region numbers was also comparatively investigated. Finally, the temperature distribution on the bottom surface of the D-MCHS was analyzed.

First, experiments were conducted to investigate the numerical calculation method. Then, a three-dimensional steady, single-phase, laminar flow and solid-fluid conjugate heat transfer numerical model was used to research the flow and heat transfer characteristics in microchannels.

The pressure drop in the D-MCHS could be reduced by increasing the number of divided flow regions along the channel-length direction. The bottom average temperature of the D-MCHS could be simultaneously affected by the number of divided flow regions and the water flow rate. The thermal uniformity performance of the D-MCHS could be improved by increasing the number of division flow regions. The number of low-temperature and high-temperature areas on the bottom surface of the D-MCHS is corresponding to the division flow region number.

The D-MCHS exhibited a positive effect on the pressure drop decrease and thermal uniformity improvement. It not only keeps the electronic module working in a secure temperature environment but also consumes less pump power for a lower pressure drop.

The purpose of this work is to gain insights about Lean Six Sigma (LSS) in the Indian context by reviewing the related literature for one decade based on various perspectives, such as author profile, year of publication, type of firm, type of methodology used, type of industry for which the research work is carried out and the key findings from the research.

This study reviews the research related to LSS from the articles published in the reputed journals. The literature used for reviewing is derived from the sources, including Science direct, Google scholar, IEEE, Taylor and Francis Group, Emerald Insight, Springer, Inderscience and Elsevier during the period between 2010 and 2021. Totally, the authors have included 141 LSS-related research articles that are published in the Indian context. The keywords used are Lean Six Sigma, Lean Six Sigma in the Indian context, Lean Sigma and LSS to identify and consolidate the research papers published during this timeframe.

The research papers collected from various reputed journals, including Scopus and non- Scopus enlisted, are classified and grouped under various categories to identify the class of author who publishes more in this field, research trend over the years, the type of firm which implements LSS, the research methodology which is commonly used in LSS and related research and also the key takeaway from these articles are highlighted. Further, the authors have also identified the major contributions of researchers in various sectors during this period in India.

This classification framework and the systematic review help in identifying the research gap and in giving directions for future researchers. It will be useful for researchers and practitioners working on the area of LSS, rural and urban entrepreneurs, start-up managers, professionals working in micro, small and medium enterprises (MSMEs) and executives of the Make in India Project to make India as Aatmanirbhar Bharat Abhiyan. Further, the clear direction of progress over the current decade in manufacturing industries, service sectors and processing industries can help the professionals working in these sectors.

This study aims to investigate the effect of Lean Six Sigma elements on the Jordanian Pharmaceutical Manufacturing organizations’ business performance.

Data were collected from 120 managers out of about 300 managers by means of questionnaire. After confirming normality, validity and reliability of the study tool, correlation analysis was carried out, and then multiple regressions were used to test the hypotheses.

The results show that there is an agreement on high implementation of Lean Six Sigma variables among Jordanian Pharmaceutical Manufacturing organizations; there are strong relationships among Lean Six Sigma variables, except between non-utilized talent and transportation; there are strong relationships between Lean Six Sigma variables and business performance. All Lean Six Sigma variables have effect on business performance, except extra processing and waiting time.

This study was carried out on the pharmaceutical industry in Jordan, generalizing results of one industry and/or one country to other industries and/or countries may be questionable. Extending the analyses to other industries and countries represents future research opportunities.

Implementing Lean Six Sigma variables in all Jordanian Pharmaceutical Manufacturing organizations can improve their business performance; also, it can be applied to other manufacturing industry.

The aim of all organizations is to reduce waste, which leads to reserve the natural resources, which is considered as a corporate social responsibility.

Only few studies related to Lean or Six Sigma have been carried out in pharmaceutical industry in Jordan. Therefore, this study might be considered as an initiative study, which studies the effect of both Lean and Six Sigma on pharmaceutical industry in Jordan.

With the growing pressure to gain optimum level of quality and speed, Lean Six Sigma (LSS) practices have drawn considerable attention as a viable alternative for process improvement. However, previous studies revealed that there is very little systematic and rigorous research to validate the claims. In this regard, this paper aims to empirically examine the effect of LSS practices on quality performance in the medical device manufacturing industry.

For this study, partial least square–based structural equation modeling (PLS-SEM) was used to empirically examine the effect of LSS practices on quality performance in Malaysian medical device manufacturing industry.

The findings of this paper revealed that LSS practices have a significant and positive effect on quality performance in the medical device manufacturing industry.

This paper will serve as a valuable implication for industry practitioners in providing them with a clearer managerial direction to exploit the strength of LSS practices to achieve company’s quality goals. Moreover, this study will serve as a basis for future LSS scholars, providing them with valuable insights and directions for future research.

This paper develops a conceptual LSS framework that captures the integrated nature of two methodologies and provides empirical evidence that supports the positive influence of LSS practices on quality performance; hence, it contributes to the growing body of LSS literature in both theoretical and empirical sense.